mod_cluster segfaults in process_info() due to wrongly generated assembler instruction movslq

Affected code:
1.3.x
1.2.x
master

Martin Osvald from Red Hat:

Description of problem:

mod_cluster segfaults in process_info() due to wrongly generated assembler instruction movslq

How reproducible:
intermittent

Steps to Reproduce:
TBD or N/A

Actual results:

Core was generated by `/usr/sbin/httpd.worker'.
Program terminated with signal 11, Segmentation fault.
#0  process_info (r=0x7fc2840386a8, errtype=<value optimized out>) at mod_manager.c:1150
1150            ap_rprintf(r, ",Elected: %d,Read: %d,Transfered: %d,Connected: %d,Load: %d\n",
(gdb) bt
#0  process_info (r=0x7fc2840386a8, errtype=<value optimized out>) at mod_manager.c:1150
#1  0x00007fc2b9d8344a in manager_handler (r=0x7fc2840386a8) at mod_manager.c:2705
#2  0x00007fc2bf54f640 in ap_run_handler (r=0x7fc2840386a8) at /usr/src/debug/httpd-2.2.15/server/config.c:158
#3  0x00007fc2bf552efe in ap_invoke_handler (r=0x7fc2840386a8) at /usr/src/debug/httpd-2.2.15/server/config.c:376
#4  0x00007fc2bf55e300 in ap_process_request (r=0x7fc2840386a8) at /usr/src/debug/httpd-2.2.15/modules/http/http_request.c:282
#5  0x00007fc2bf55b178 in ap_process_http_connection (c=0x7fc2ac051d00) at /usr/src/debug/httpd-2.2.15/modules/http/http_core.c:190
#6  0x00007fc2bf557148 in ap_run_process_connection (c=0x7fc2ac051d00) at /usr/src/debug/httpd-2.2.15/server/connection.c:43
#7  0x00007fc2bf564052 in process_socket (thd=0x7fc2bffe8d30, dummy=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/worker/worker.c:544
#8  worker_thread (thd=0x7fc2bffe8d30, dummy=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/worker/worker.c:894
#9  0x00007fc2bddf99d1 in start_thread (arg=0x7fc2a51f4700) at pthread_create.c:301
#10 0x00007fc2bdb46a8d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:115
(gdb)

Expected results:

no segfault

Additional info:

It looks like the produced assembler in function process_info() is wrong, there is a movslq instruction leading to results not expected on C source code level...

# gdb /usr/sbin/httpd.worker ./dump_new/dump/core.httpd.worker.pid8422.usr48.sig11.tim1493787964
...
(gdb) f 0
#0  process_info (r=0x7fc2840386a8, errtype=<value optimized out>) at mod_manager.c:1150
1150            ap_rprintf(r, ",Elected: %d,Read: %d,Transfered: %d,Connected: %d,Load: %d\n",
(gdb) list
1145    #if AP_MODULE_MAGIC_AT_LEAST(20101223,1)
1146            proxystat  = (proxy_worker_shared *) pptr;
1147    #else
1148            proxystat  = (proxy_worker_stat *) pptr;
1149    #endif
1150            ap_rprintf(r, ",Elected: %d,Read: %d,Transfered: %d,Connected: %d,Load: %d\n",
1151                       (int) proxystat->elected, (int) proxystat->read, (int) proxystat->transferred,
1152                       (int) proxystat->busy, proxystat->lbfactor);
1153            
1154        }
(gdb) i registers 
rax            0x7fc26b59df58   140473001434968           <<<--- there should be 0x7fc2bf507f98 instead
rbx            0x7fc24c056b5c   140472475806556
rcx            0x7fc2840229a8   140473415117224
rdx            0xffffffffac096100       -1408671488
rsi            0x7fc2b9d85c00   140474318347264
rdi            0x7fc2840386a8   140473415206568
rbp            0x17     0x17
rsp            0x7fc2a51f3b40   0x7fc2a51f3b40
r8             0x3036203a6c74542c       3473999597862671404
r9             0x6873756c462c6666       7526488510160463462
r10            0x3031203a74696177       3472592223112618359
r11            0x0      0
r12            0x7fc2a51f3b98   140473970670488
r13            0x7fc2840386a8   140473415206568
r14            0x17     23
r15            0x431bde82d7b634db       4835703278458516699
rip            0x7fc2b9d7d90d   0x7fc2b9d7d90d <process_info+477>
eflags         0x203    [ CF IF ]
cs             0x33     51
ss             0x2b     43
ds             0x0      0
es             0x0      0
fs             0x0      0
gs             0x0      0
(gdb) disassemble /m $rip
...
1143            pptr = (char *) ou;
   0x00007fc2b9d7d8f4 <+452>:   mov    0x58(%rsp),%rax

1144            pptr = pptr + ou->offset;
1145    #if AP_MODULE_MAGIC_AT_LEAST(20101223,1)
1146            proxystat  = (proxy_worker_shared *) pptr;
1147    #else
1148            proxystat  = (proxy_worker_stat *) pptr;
   0x00007fc2b9d7d903 <+467>:   movslq 0x138(%rax),%rdx       <<<--- this brings wrong result into rdx
   0x00007fc2b9d7d90a <+474>:   add    %rdx,%rax              <<<--- which is then added to rax, rax should normally hold address of ou + ou->offset 

1149    #endif
1150            ap_rprintf(r, ",Elected: %d,Read: %d,Transfered: %d,Connected: %d,Load: %d\n",
   0x00007fc2b9d7d8f9 <+457>:   lea    0x8300(%rip),%rsi        # 0x7fc2b9d85c00  <<<--- the string ",Elected: %d,Read: %d,Transfered: %d,Connected: %d,Load: %d\n"
   0x00007fc2b9d7d900 <+464>:   mov    %r13,%rdi                                  <<<--- r parameter
=> 0x00007fc2b9d7d90d <+477>:   mov    0xc0(%rax),%r9         <<<--- ap_rprintf params starting here proxystat->elected, ...
   0x00007fc2b9d7d914 <+484>:   mov    0x20(%rax),%r8
   0x00007fc2b9d7d918 <+488>:   mov    0x28(%rax),%rcx
   0x00007fc2b9d7d91c <+492>:   mov    0x30(%rax),%rdx
   0x00007fc2b9d7d920 <+496>:   mov    0x18(%rax),%eax
   0x00007fc2b9d7d923 <+499>:   mov    %eax,(%rsp)
   0x00007fc2b9d7d926 <+502>:   xor    %eax,%eax
   0x00007fc2b9d7d928 <+504>:   callq  0x7fc2b9d7c0f0 <ap_rprintf@plt>

...
(gdb)

from gdb it looks like proxystat contains correct address, but it only seems so as very likely due to debugging info knowing where to look:

(gdb) p proxystat 
$2 = (proxy_worker_stat *) 0x7fc2bf507f98
(gdb) p *proxystat
$11 = {
  status = 0, 
  error_time = 0, 
  retries = 0, 
  lbstatus = 0, 
  lbfactor = 0, 
  transferred = 0, 
  read = 0, 
  elected = 0, 
  route = '\000' <repeats 63 times>, 
  redirect = '\000' <repeats 63 times>, 
  context = 0x0, 
  busy = 206158430208, 
  lbset = 1818454389
}
(gdb)

but actually computed value for proxystat by assembler is wrongly 0x7fc26b59df58 instead of 0x7fc2bf507f98:

(gdb) x/x $rax
0x7fc26b59df58: Cannot access memory at address 0x7fc26b59df58
(gdb)

address of ou and offset value:

(gdb) p ou
$5 = (nodeinfo_t *) 0x7fc2bf507e58
(gdb) p /x ou->offset
$7 = 0x140
(gdb)

their correct sum:

(gdb) p /x 0x7fc2bf507e58 + 0x140
$9 = 0x7fc2bf507f98
(gdb)

which is the same as already mentioned proxystat using debuginfo:

(gdb) p proxystat 
$2 = (proxy_worker_stat *) 0x7fc2bf507f98
(gdb)

so the below 2 lines in process_info() lead to computing it wrongly and they will have to be rewritten:

1097 static char * process_info(request_rec *r, int *errtype)
1098 {
...
1141         pptr = (char *) ou;
1142         pptr = pptr + ou->offset;